Camper compatibility
Aluma Tray flatbeds for AT Overland campers
AT Overland builds habitats and truck campers. The 2026 options sheet lists a pair of 25 inch deck boxes for the HD-60 that it notes are commonly used by AT Overland.
AT Overland flatbed builds on the HD-60
AT Overland is based in Prescott, Arizona. It started out building trailers and now makes toppers, a slide-in camper and a hard sided flatbed camper, the Aterra XLF, for overland travel.
Our 2026 options sheet lists a pair of front cargo boxes for the Aluma Tray HD-60: a 25 inch driver side box at $2,491 USD and a 25 inch passenger side box at $2,491 USD. The sheet notes them as commonly used by AT Overland. That tells you the boxes exist and where they go. It is not a statement that a given AT Overland camper fits the HD-60.
The HD-60 is our chassis cab flatbed for 1 ton trucks at 60 inch cab to axle. It is rated to 5,000 lbs evenly distributed, with a vacant deck of 9'02" long x 7' wide, and the bulkhead is included. Not sure of your chassis? Here is how to measure cab to axle.
For an AT Overland flatbed build, send us the camper's footprint, its weight and where its mounts sit, plus the truck and its cab to axle. We confirm the tray and the box layout in writing. Box prices are on aluminum flatbed prices.
Start here
Your truck picks the tray
Whatever camper you run, the flatbed model is decided by the truck underneath it. Find your truck below, then talk to us about the camper.
| 3/4 ton or 1 ton, short box | Aluma Tray 6.75'Rated to 3,000 lbs. From $11,819 USD |
|---|---|
| 3/4 ton or 1 ton, 8 foot long box | Aluma Tray 8'Rated to 3,000 lbs. From $12,879 USD |
| 1 ton chassis cab, 60 inch cab to axle | Aluma Tray HD-60 or HD-60-HCRated to 5,000 lbs. From $17,820 USD |
We do not build flatbeds for midsize trucks, so no Tacoma, Ranger, Gladiator or Colorado. There is no tray for the Toyota Tundra either.
Fitment
Which Aluma Tray suits an AT Overland camper
We have no factory confirmed chart for AT Overland campers, so the deck box listing is the only AT specific detail we publish. The truck decides the tray, and the camper is confirmed per build.
What we can confirm
Kits made for AT Overland campers
The two boxes below are the only items on our 2026 options sheet noted for AT Overland. Both are for the HD-60.
- 25" rectangular deck box, driver sideFor the HD-60$2,491 USD
- 25" rectangular deck box, passenger sideFor the HD-60$2,491 USD
The range
Aluma Tray models
Running an AT Overland camper?
Send us your truck, your AT Overland camper model and its dimensions. We will tell you which tray fits, what it costs, and what kit you need.
Other camper brands
Questions
Fitment questions
Which Aluma Tray fits a short box truck?
The Aluma Tray 6.75' replaces the bed on a 3/4 ton or 1 ton short box truck. It is rated to 3,000 lbs evenly distributed and comes with four locking under-deck boxes.
Which Aluma Tray fits an 8 foot long box truck?
The Aluma Tray 8' replaces the bed on a 3/4 ton or 1 ton long box truck. It carries the same 3,000 lb rating as the 6.75' and adds a 25 inch front bulkhead option.
Which Aluma Tray fits a chassis cab?
The Aluma Tray HD-60 and HD-60-HC both fit 1 ton chassis cabs with a 60 inch cab to axle measurement. Both are rated to 5,000 lbs evenly distributed and include their front bulkhead in the starting price. For an 84 inch cab to axle chassis, see the HD-84. Its price, weight and load rating are published once the factory signs them off.
Will an Aluma Tray fit my camper?
Most hard side slide-in and flatbed campers can run on an Aluma Tray, but fit depends on the camper, not just the truck. Talk to us or an authorized dealer with your camper make, model and dimensions before ordering.
Do I need anything extra if my truck is a dually?
Yes. Dual rear wheel trucks require the dually fender extension kit at $2,268 USD, which includes fenders, a stair mount extender and a set of jack extensions for the front jacks. It is available on the 8', HD-60 and HD-60-HC. It also works well on a single wheel conversion running wider MPT tires.
What are the 25 inch deck boxes on the HD-60?
They are rectangular front cargo boxes for the deck of the Aluma Tray HD-60, one driver side at $2,491 USD and one passenger side at $2,491 USD. Our 2026 options sheet notes them as commonly used by AT Overland.