Built for the OEV High Country
Aluma Tray HD-60-HC chassis cab flatbed
Built for the OEV High Country. Tapered securement pockets bolt the camper to the tray and keep it fully isolated from the deck. Deeper 15 inch bulkhead in place of the HD-60's 7 inch.
The photos on this page show an earlier build of this tray. The under-deck box profiles and the tail lights have changed since.
Starting at $19,075 USD
- Rated load, evenly distributed
- 5,000 lbs
- Tray weight
- ≥ 900 lbs
- Typical lead time
- About 8 weeks
A chassis cab flatbed built for the OEV High Country
The Aluma Tray HD-60-HC is a chassis cab flatbed for 60 inch cab to axle chassis, built to carry the OEV High Country camper.
It is rated to 5,000 lbs evenly distributed, the same as the HD-60, and starts at $19,075 USD with the bulkhead included.
Built for the High Country
The camper bolts into the tray
The High Country has feet on its underside. They drop into four tapered pockets in the deck, two at the front and two at the rear, and the camper bolts down to the tray, so the two travel as one assembly.
That is why this is the only tray we build for the High Country. Other camper brands do not have the same mounting points underneath, so there is nothing for the pockets to locate. A High Country can also be carried on a standard tray with TorkLift tie-downs. The pockets are what this tray is for.
Specifications
Full specs
Aluma Tray HD-60-HC specifications
- Fits
- Domestic commercial 60 inch cab to axle chassis
- Load capacity
- 5,000 lbs (2,273 kg)Evenly distributed
- Tray weight
- ≥ 900 lbs
- Vacant deck
- 8' long x 7' wideAs built
- Deck surface
- Rhino Lined
- Construction
- CNC cut and formed high strength aluminum, powder coated
- Storage
- Four locking under-deck boxes
- Bulkhead
- 15" rectangular, driver side half, 42" wideIncluded
- Lead time
- About 8 weeksVaries with how busy the shop is
- Starting price
- $19,075 USD
Standard features
- Powder coated CNC cut and formed high strength aluminum
- Rhino Lined deck surface
- Four locking under-deck storage boxes with weep holes and sealed doors
- Fully isolated from the chassis with powder coated steel mounts and urethane bushings
- Anodized aircraft L-Track along both sides of the deck
- Weighted mudflap kit and rock guards for the rear boxes
- Fuel and DEF fills built into the bulkhead for above-deck filling
- DOT LED lighting, two brake, signal and back lights per side
- Trailer plug, 4 and 7 pin connector
- Mounts to dealer drilled chassis locations on 5 inch SIL rails
- 15 inch bulkhead on the driver side half, 42 inches wide, with a locking sealed upper storage compartment
- Driver side lower compartment houses the fuel and DEF fills
- Passenger side is left blank for a matching 15 inch box or a 14.5 inch spare tire carrier
- Four camper tie down securement brackets in the deck, two front and two rear
- The High Country bolts down to them and stays fully isolated from the deck
- Rated to 5,000 lbs evenly distributed
Pricing
What a build costs
The starting price is the tray. These items are priced separately because they depend on your truck.
Required
- Tray to chassis mounting kitRequiredSpecific kit determined by your truck$1,166
- Fuel kitRequired$290 gas, $290 diesel without DEF, $542 diesel with DEFPriced by truck
- Dually fendersRequiredOnly if your truck is dual rear wheel$2,268
Bulkhead
- 15" Solid, driver sideIncluded
- 15" matching box, passenger side$2,491
- 14.5" spare tire carrier, passenger side$1,034
Aluma Tray HD-60-HC builds
The photos on this page show an earlier build of this tray. The under-deck box profiles and the tail lights have changed since. Click any photo to open it larger. Arrow keys step through the set.
Ready to spec your build?
Tell us your truck, your camper and how you travel. We will tell you which tray fits and what it costs, in writing.
Common questions
What is an Aluma Tray?
An Aluma Tray is an aluminum flatbed that replaces your truck's factory bed so you can carry a slide-in or flatbed truck camper. Every model is CNC cut and formed from high strength aluminum, powder coated, and finished with a Rhino Lined deck. They are built by Lite Industries in Red Deer, Alberta.
Which trucks does an Aluma Tray fit?
Aluma Trays fit full size 3/4 ton and 1 ton trucks, plus 1 ton chassis cabs with a 60 inch cab to axle measurement. The 6.75' replaces a short box, the 8' replaces a long box, and the HD-60 and HD-60-HC mount to a 60 inch cab to axle chassis. For an 84 inch cab to axle chassis, see the HD-84. We do not make trays for midsize trucks.
How much does an Aluma Tray cost?
Starting prices are $11,819 USD for the 6.75', $12,879 for the 8', $17,820 for the HD-60 and $19,075 for the HD-60-HC. Every build also needs a tray to chassis mounting kit at $1,166 and a fuel kit priced by your truck, and the 6.75' and 8' need a front bulkhead, which starts at $3,329. All pricing is USD. The HD-84 has no published price yet.
How much weight can an Aluma Tray carry?
The 6.75' and 8' are rated to 3,000 lbs evenly distributed. The HD-60 and HD-60-HC are rated to 5,000 lbs evenly distributed. Those ratings assume the load is spread across the deck, not concentrated in one spot.
What is the lead time on an Aluma Tray?
Typical lead time is about 8 weeks. Talk to your dealer or to us directly for current build slots, because lead time moves with order volume.
Does the Aluma Tray come with a warranty?
Yes. Every Aluma Tray carries a one year limited base warranty and a three year limited structural warranty from Lite Industries. You must register the warranty within 30 days of purchase for coverage to activate, and the warranty covers personal use only.
Can another camper go on the HD-60-HC?
The HD-60-HC is built for the OEV High Country. Other camper brands do not have the same mounting points underneath, so there is nothing for the securement pockets on this tray to locate. Talk to us or your dealer about which tray suits your camper.
Is the bulkhead included on the HD-60-HC?
Yes. The bulkhead is included in the $19,075 USD starting price. On the HD-60-HC it is 15" rectangular, driver side half, 42" wide.